Setting Up The Dvd Player; Introduction Of Dvd Setup Adjustments; Menu Operations Identical For Dvd Setup Adjustments - Pioneer DVH-3220UB Operation Manual

Section
02 Operating this unit
SLA (source level adjustment)
SLA (Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
! Settings are based on the FM volume level, which
remains unchanged.
Before adjusting source levels, compare the FM
volume level with the level of the source you wish
to adjust.
! The MW/LW volume level can also be adjusted
with this function.
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the source volume.
Adjustment range: +4 to –4
3 Press M.C. to confirm the selection.
Notes
! When selecting FM as the source, you cannot
switch to SLA.
! Operation is complete even if the menu is can-
celled before being confirmed.
24
En

Setting up the DVD player

Introduction of DVD setup
adjustments
You can use this menu to change audio, subtitle, par-
ental lock and other DVD settings.
! To perform this function, set the remote control to
DVD mode.
1 Select DVD as the source and then press g.
2 Press MENU when the disc is stopped.
The DVD setup menu is displayed.
3 Move the thumb pad left or right to switch the
DVD setup menu categories.
LANG. (language)—PICT. (picture)—GEN. (gener-
al)
4 Move the thumb pad up or down to select the
DVD setup function names.
For LANG.: SUBTITLE LANG. (subtitle language
settings)—AUDIO LANG. (audio language set-
tings)—MENU LANG. (menu language settings)
—OSD LANGUAGE (on screen display language
setting)—CHARACTER SET (character set set-
ting)
For PICT.: ANGLE ICON DISPLAY (angle icon)—
TV ASPECT (TV aspect)—SLIDESHOW TIME (sli-
deshow interval time setting)
For GEN.: PARENTAL (parental lock)—DivX SUB-
TITLE (DivX subtitle)—IEC DIGITAL OUTPUT (di-
gital output setting)—DivX VOD (DivX VOD)—
SAMPLING OUTPUT (down sampling output set-
ting)
If you press MENU during display of a DVD setup
menu, the DVD setup menu is canceled and the
unit returns to the previous display.
Menu operations identical for
DVD setup adjustments
Returning to the previous display
1 Press RETURN.