6
CONTROLS
6.1
Clutch lever
6.2
Hand brake lever
6.3
Throttle grip
6.4
Kill switch (All EXC‑F models)
6.5
Kill switch (All XCF-W models)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
B01496-10
Hand brake lever
The hand brake lever is used to activate the front brake.
B01497-10
The throttle grip
B01498-10
Kill switch
1
Possible states
•
Kill switch
the engine can be started.
•
Kill switch
goes out if it was running, or does not start if it was off.
B01585-10
Kill switch
1
Possible states
•
Kill switch
the engine can be started.
•
Kill switch
goes out if it was running, or does not start if it was off.
B01586-10
is fitted on the left side of the handlebar.
1
is located on the right side of the handlebar.
1
is fitted on the right side of the handlebar.
1
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine
14