Philips PFL4208D User Manual page 33

More sound settings
You can change the settings in the Sound
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to change, then press OK.

[Sound style]: Access predefined sound
settings.

[Restore style]: Restore the last-
selected predefined sound setting.

[Bass]: Adjust the bass level of the
speaker and headphones.

[Treble]: Adjust the treble level of the
speaker and headphones.

[Surround mode]: Select a surround
sound mode to enhance your audio
experience.

[Auto incredible surround 3D]: Select
a surround sound mode to enhance
your audio experience in 3D mode. For
certain models.

[Headphone volume]: Adjust
headphone volume.

[Advanced]: Access advanced settings
to enhance your audio experience.
- [Auto volume leveling]: Enable
the reduction of sudden volume
changes, for example, when switching
channels.
- [TV speakers]: Select the
preferred speakers to stream audio
from the TV. See Connect your TV >
Set up EasyLink devices > Select
speaker output (Page 51).
- [Clear sound]: Enhance sound
quality.
- [Audio Out format]: Select the
type of audio output through the digital
audio output connector. Choose between
[Multichannel] and [Stereo].
- [Audio Out levelling]: Set the
output level for stereo audio. Select [Less]
for a certain amount of loss in intensity or
signal strength. Select [More] for no loss in
intensity or signal strength.
- [HDMI 1 - ARC]: Enable audio
output from the ARC-compliant device
connected to the HDMI 1 connector.
- [Audio out delay]: Automatically
sync the image on the TV to the audio from
a connected home theater. You do not need
to use this setting when connecting the TV
to a Philips home theater.
- [Audio out offset]: Adjust the
setting for audio output delay. Available if
[Audio out delay] is switched on.
Audio format
Digital channels
If a digital TV channel broadcaster streams
audio in multiple formats, you can select an
audio format.
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages] > [Preferred audio format].
3. Select an option, then press OK.

[Standard]: Receive standard audio
format (MPEG).

[Advanced]: Receive advanced audio
formats, if available (AAC, Dolby
Digital, or Dolby Digital Plus).
If an analog TV channel broadcaster streams
stereo audio in multiple formats, you can
select an audio format.
1. Press .
2. Select [Setup] > [Channel settings] >
[Mono/Stereo].
3. Select a setting, then press OK.
EN 33