Channel Issues; Picture Issues - Philips PFL4208D User Manual

Channel issues

You want to install TV channels:
See Change your TV settings > Automatic
installation (Page 34) for instructions on
installing analog or digital channels.
No digital channels were found during the
installation:

See the technical specifications to make
sure that your TV supports DVB-T or
DVB-C in your country.

Make sure that all cables are properly
connected and that the correct
network is selected.
Previously installed channels do not appear
in the channel list:
Make sure that the correct channel list is
selected.
You want to rearrange or reorder the
channel list:
After channels are installed, they appear in
the channel list. For information about
managing channel lists, including rearranging
channels, see Watch TV > Manage channel
lists (Page 12).

Picture issues

The TV is on, but there is no picture or the
picture is distorted:

Make sure that the antenna is properly
connected to the TV.

Make sure that the correct device is
selected as the display source.

Make sure that the external device or
source is properly connected.
There is sound but no picture:
Make sure that the picture settings are set
correctly.
There is poor TV reception from an
antenna connection:

Make sure that the antenna is properly
connected to the TV.

Loud speakers, unearthed audio
devices, neon lights, high buildings, and
other large objects can influence
reception quality. If possible, try to
improve the reception quality by
changing the antenna direction or
moving devices away from the TV.

If reception on only one channel is
poor, fine-tune this channel.
There is poor picture quality from
connected devices:

Make sure that the devices are
connected properly.

Make sure that the picture settings are
set correctly.
The TV did not save your picture settings:
Make sure that the TV location is set to
Home. You can change and save settings in
this mode.
The picture does not fit the screen; it is
too big or too small:
Change to a different picture format.
The picture format keeps changing with
different channels:
Instead of the picture format [Auto zoom],
select a different picture format.
The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.
The picture from broadcasts is scrambled:
You may need a Conditional Access Module
to access content. Check with your service
operator.
An "e-sticker" banner displaying
information appears on the TV display:
The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. See Change your TV settings
> Other settings > Home mode (Page 38).
The computer display on the TV is not
stable:

Make sure that your PC uses the
supported resolution and refresh rate.
See Specifications > Display
resolutions (Page 60).

Change the TV picture format to
[Unscaled].
EN 57