Bosch 200 Series Manual page 5

Ptz camera system
Hide thumbs Also See for 200 Series:
Table of Contents

Advertisement

5 | AutoDome 200 Series PTZ Camera System
RS-232 RX/TX or RS-485 ± - optional control data
(dip switch selectable)
Video
BNC/UTP
8 With Ethernet models, the biphase ± can optionally be used as the audio line in
connector.
9 Ethernet models have no UTP analog output only BNC (coax).
Mounts/Accessories
Pendant Mounts
Arm Mounts
Wall Arm (No Transformer)
Wall Arm (120/230 VAC Transformer)
Wall Arm (120/230 VAC Transformer
and Fiber Optics)
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate
Mast (Pole) Mounting Plate
Pipe Mounts
Pipe Mount Cap
Roof Mounts
Roof (Parapet) Mount
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount
Power Supplies
Outdoor Power Supply Box
(120/230 VAC Transformer)
Outdoor Power Supply Box
(120/230 VAC Transformer and Fiber
Optics)
Extended temp heater
module extends temperature range to –
60°C (–76°F) for EnviroDome
only
®
Fiber Optic Models
Optical
50/125 mm, 62.5/125 mm, low loss
Fiber Compatibility
multimode glass fiber, rated for a minimum
system bandwidth of 20 MHz
(video 850 nm/Control 1300 nm)
Max Distance
4 km (2.5 miles)
9
VG4-A-PA0
VG4-A-PA1 / VG4-A-PA2
VG4-A-PA1F / VG4-A-
PA2F
VG4-A-9542
VG4-A-9541
VG4-A-9543
VG4-A-9230
LTC 9230/01
VG4-A-PSU1 / VG4-A-
PSU2
VG4-A-PSU1F / VG4-A-
PSU2F
VG4-SHTR-XT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autodome 200 series

Table of Contents