GE 49-80535-1 Owner's Manual page 29

Problem
Clock and timer do
not work
Oven will not self-clean
"Crackling" or
"popping" sound
Excessive smoking
during a clean cycle
Oven door will not
open after a clean cycle
Oven not clean after a
clean cycle
"F—and a number
or letter" flash
in the display
Possible Causes
Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
A fuse in your home
may be blown or the
circuit breaker tripped.
Oven controls improperly set. • See the Using the clock and timer section.
Oven controls improperly set.
Oven door is not in the
locked position.
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive soil.
Oven too hot.
Oven controls not properly set. • See the Using the self-cleaning oven section.
Oven was heavily soiled.
You have a function error code. • Touch the CLEAR/OFF pad. Put the oven back into
If the function code repeats. • Disconnect all power to the range for at least 30
What To Do
grounded outlet.
• Replace the fuse or reset the circuit breaker.
• See the Using the self-cleaning oven section.
• Make sure you move the door latch handle all the way
to the right.
• This is normal.
• Touch the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the light on the
SELF CLEAN pad goes off. Wipe up the excess soil
and reset the clean cycle.
• Allow the oven to cool below locking temperature.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
operation.
seconds and then reconnect power. If the function
error code repeats, call for service.
• If a function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
may have been moved, if only slightly, from the
locked position. Make sure the latch is moved to
the right as far as it will go. Touch the CLEAR/OFF pad.
Allow the oven to cool for one hour. Put the oven
back into operation.
GEAppliances.com
29