Hama PC-Link-Cable Operating Instruction page 6

00049030bda 10.10.2005
L L PC-Link-Cable, USB 2.0
Package contents:
1 USB 2.0 PC Link cable
1 Driver CD-ROM
1 Printed quick guide
Important before you use the product:
Please read these instructions completely before installing the product as des-
cribed in the instructions. If you do not do so, the product may not function pro-
perly!
Caution! You must install the enclosed software before connecting the Hama
USB 2.0 PC Link cable to the computer.
Installation on Windows 98 Second Edition or Windows Millennium Edition (ME):
After the operating system has loaded and the desktop is complete, insert the
driver CD-ROM in your drive. Open My Computer and select the drive where you
inserted the CD-ROM. Double-click the PL2501-v1007ML.exe file.
Alternatively, click Start -> Run -> and enter "D:\PL2501_v1007ML.exe" (replace
"D" with the drive letter of your CD-ROM drive).
The installation program is started. After the welcome screen, click -> Next and
then -> Finish. This completes the software installation.
Important notes: 98 Second Edition and ME
You can check whether the controller has been installed successfully by selec-
ting -> Start ->Settings -> Control Panel -> System -> Hardware -> Device
Manager. The following entrie must appear without a yellow exclamation mark:
USB Controller:
• High-Speed USB Bridge Cable
11:45 Uhr Seite 5
5