Unregister The Handsets; Restore Default Settings - Philips D200 Extended User Documentation

4
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
Note
•
For models with an answering machine, you hear a
confirmation beep.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
•
The preset PIN is 0000. No change can be made on it.

Unregister the handsets

1
Press MENU/OK.
2
Select [Services] > [Unregister], then
press MENU/OK to confirm.
3
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to confirm.
» The handset is unregistered.
Tip
•
The handset number displays beside the handset name
in standby mode.

Restore default settings

You can reset your phone settings to the
original factory settings.
1
Press MENU/OK.
2
Select [Services] > [Reset], then press
MENU/OK to confirm.
» The handset displays a confirmation
request.
3
Press MENU/OK to confirm.
» All settings are reset.
EN 31