Change The Remote Access Pin Code; Charge The Handset; Check The Battery Level; What Is Standby Mode - Philips D200 Extended User Documentation

Hide thumbs Also See for D200:
Table of Contents

Advertisement

4
Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press
to select [am] or [pm] (Country
/
dependent).
5
Press MENU/OK to confirm.
Change the remote access
PIN code
Note
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press MENU/OK.
2
Select [Answ. Machine] > [Remote
access] > [Change PIN], then press
MENU/OK to confirm.
3
Enter the old PIN, then press MENU/OK
to confirm.
4
Enter the new PIN code, then press
MENU/OK to confirm.
5
Enter the new PIN code again, then press
MENU/OK to confirm.
» The setting is saved.

Charge the handset

10
EN
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
» The handset starts charging.
Note
Charge the batteries for 8 hours before first use.
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 22).
Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery
level.
When the handset is off the base
station, the bars indicate the battery
level (full, medium and low).
When the handset is on the base
station/charger, the bars flash until
charging is complete.
The empty battery icon flashes. The
battery is low and needs recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it is idle.
The standby screen displays the handset name
or date and time, and handset number.
Tip
Press and hold MENU/OK to switch between the
handset name and date and time display.

Advertisement

Table of Contents
loading

This manual is also suitable for:

D205

Table of Contents