Access Codes; Remote Lock - Nokia N97 mini User Manual

or you may receive or request the settings from the network
service providers as a special message.
You can change the general settings in your device, such as
language, standby mode, display, and keypad lock settings.

Access codes

PIN or PIN2 These protect your SIM card against
code unauthorised use or are required to access
some features.
(4-8 digits)
You can set your device to ask for the PIN
code when you switch it on.
If not supplied with your SIM card or you
forget the codes, contact your service
provider.
If you enter the code incorrectly three times
in a row, you need to unblock the code with
the PUK or PUK2 code.
PUK or PUK2 These are required to unblock a PIN or PIN2
code code.
(8 digits) If not supplied with your SIM card, contact
your service provider.
118
IMEI number This is used to identify valid devices in the
network. The number can also be used to
(15 digits)
block, for example, stolen devices.
To view your IMEI number, dial *#06#.
Lock code This helps you protect your device against
(security unauthorised use.
code)
You can set your device to ask for the lock
(min. 4 digits code that you define.
or characters)
Keep the code secret and in a safe place,
separate from your device.
If you forget the code and your device is
locked, your device will require service.
Additional charges may apply, and all the
personal data in your device may be deleted.
For more information, contact a Nokia Care
Point or your device dealer.

Remote lock

You can lock your device remotely using a predefined text
message. You can also lock the memory card remotely.
Enable remote locking
1 Select Menu Settings
>
Security settings
>
phone locking > Enabled.
2 Enter the text message content (5-20 characters), verify
it, and enter the lock code.
and Phone Phone mgmt.
>
Phone and SIM card Remote
>
© 2011 Nokia. All rights reserved.
>