Package Contents - Lexar Multi-card 24-in-1 reader Quick Start Manual
Hide thumbs
Also See for Multi-card 24-in-1 reader:
- Datasheet (1 page) ,
- Quick start manual (66 pages)
Table of Contents
Advertisement
this Quick start guide explains how to set up, connect, and use the Lexar Multi-
card 24-in-1 usB reader.
Package Contents
Lexar Multi-card 24-in-1 usB reader
•
usB 2.0 cable
•
reader operation instructions
•
Connection
usB 2.0
•
System Memory Requirements
Windows
®
•
Mac Os
®
X 10.4 and up
•
XP/Windows Vista
®
/Windows 7
Advertisement
Table of Contents
Need help?
Do you have a question about the Multi-card 24-in-1 reader and is the answer not in the manual?
Questions and answers
my computer doesn't recognize the card reader
Your Lexar Multi-Card 24-in-1 reader may not be recognized by your computer for the following reasons:
1. USB Connection Issue – Ensure the USB cable is properly connected to both the reader and the computer’s USB port.
2. Network Drive Conflict (Windows XP) – If your computer is linked to a network with multiple drives, some reader slots may not be detected. Try manually assigning drive letters.
3. Driver Not Needed but System Issue – The reader does not require drivers, but restarting the computer or trying a different USB port may help.
4. Power or Recognition Issue – Check if the LED activity light turns on when connected. If not, the reader may not be receiving power.
5. Faulty USB Port or Cable – Try using a different USB cable or port to rule out hardware issues.
6. Card Detection Problem – Ensure the memory card is properly inserted and compatible with the reader.
If none of these solutions work, the reader may be faulty.
This answer is automatically generated