Selecting Communication Mode - Canon SELPHY CP900 User Manual

Selecting Communication Mode

The setting procedure of SELPHY varies depending on the communication mode. Select the communication
mode according to the device you are using. You can change the communication mode later
Ad Hoc Mode
You can connect SELPHY to a wireless LAN and print images without an access point.
Some smartphones may not be able to connect in ad hoc mode. In such a case, use infrastructure mode
(below).
Smartphone*
Infrastructure Mode
You can connect smartphones, cameras, or computers to a wireless LAN using your access point to print
images.
Smartphone*
Camera*
Computer*
* You need to install the designated application (free) on your smartphone. See our website for detailed information
1
on supported smartphones and the designated application (free).
* Cameras must be PictBridge (DPS over IP) compliant for connecting to wireless LANs.
2
This product can print using PictBridge over wireless LANs.
PictBridge is a standard to facilitate directly connecting digital cameras and printers. This product is
compliant with the DPS over IP standard that allows the use of PictBridge in network environments.
* You need to install the supplied software on the computer
3
* Some cameras can be used as an access point.
4
28
(p. 29)
1
(p. 31)
1
2
Access point*
3
SELPHY
4
SELPHY
(p. 37).
(p. 41).