HP 2510-48 Specification page 10

QuickSpecs
Technical Specifications
HP 2510-24 Switch
(J9019B)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
DA - 12599 North America — Version 18 — November 5, 2013
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC
transceivers)
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
100 Mb Latency
1000 MB latency
Throughput
Switching capcity
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/ Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
dissipation
Voltage
Current
Maximum power rating
Frequency
HP 2510 Switch Series
www.hp.com/networking/services
9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
4.89 lb. (2.22 kg), Fully loaded
MIPS 32 @ 264 MHz, 8 MB flash, 64 MB SDRAM;
packet buffer size: 384 KB
< 4.9 µs (64-byte packets)
< 2.6 µs (64-byte packets)
up to 6.5 million pps (64-byte packets)
8.8 Gbps
8000 entries
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 0 dB no fan
68 BTU/hr (71.74 kJ/hr)
100-127/200-240 VAC
0.7/0.4 A
20 W
50/60 Hz
for details on
Page 10