Using The Defcon Securespacers - Targus DEFCON SCL User Manual

Scl serialised combination cable lock

Hide thumbs Also See for DEFCON SCL:

Enlarged version

Targus Notebook Security DEFCON

Locking the DEFCON SCL to your Notebook Computer

NOTE: HOLD THE DEFCON SCL WITH BOTH HANDS FOR ADDITIONAL STABILITY WHILE INSERTING OR

REMOVING THE LOCK.

1 Using the dials, enter the preset combination. Line up the combination so that it appears in the

windows.

Locking button

DEFCON SCL

2 Press and hold the locking button to align the locking teeth.

NOTE: FOR THE LOCKING BUTTON TO DEPRESS COMPLETELY YOU MUST ENTER THE CORRECT

COMBINATION.

3 Insert the DEFCON SCL into your notebook computer's lock slot and release the locking button.

NOTE: DUE TO THE VARIATION IN THE SIZE OF THE SECURITY SLOTS ON VARIOUS NOTEBOOK MODELS,

YOU MAY FIND THAT THERE IS SOME SLACK BETWEEN THE LOCK AND THE COMPUTER. THE SUPPLIED

DEFCON SECURESPACERS ARE THE BEST SOLUTION FOR OPTIMAL FIT AND SECURITY. SEE THE FOL-

LOWING INSTRUCTIONS ON HOW TO USE THE SECURESPACERS.

4 Turn the dials to conceal your combination.

SCL Serialized Combination Cable Lock

Secure Spacer

Locking teeth

Targus Notebook Security DEFCON

Using the DEFCON SecureSpacers

1 Insert your DEFCON locking device into the computer's lock slot.

2 Pull the DEFCON locking device away from the computer and check whether the gap is excessive.

3 If so, try each of the SecureSpacers to determine which one fits the gap. The SecureSpacers come in

three sizes: 1.6 mm, 0.8 mm, and 0.4 mm.

NOTE: DO NOT REMOVE THE ADHESIVE STRIP FROM ANY OF THE SECURESPACERS UNTIL YOU DECIDE

WHICH ONE TO USE.

4 Once you know which SecureSpacer you are going to use, remove the locking device from the

computer. Then remove the adhesive strip from the back of the SecureSpacer and attach the spacer

to the DEFCON lock.

SCL Serialized Combination Cable Lock

Table of Contents