Philips 200VW8 Service Manual page 63

3. LCD SPECIFICATION
3.1 LCD specification
Panel AUO
M201EW02_V8
Resolution 1680x1050 (WSXGA+)
Active area (HxV) 433.44mm x 270.90mm
Outside 459.4 x 296.4 x 16.6 (mm)
dimensions(WxHxD)
Pitch (mm) 0.258 x 0.258
Display surface Anti-Glare
Color depth 16.7M colors
Backlight 4 CCFL
Viewing angle 160 for H/V (Typ.)
Contrast ratio 1000:1 (Typ.); 800:1 (Min)
White luminance 300nit (Typ); 240nits (Min)
Color gamut 72%
Gate IC Raydium (for 800) ; Toshiba
(for 80A)
Source IC Raydium (for 800) ; Novatec
(for 80A)
Response time 5ms
4 COSMETICS APPEARANCE
4.1 GAP definition
The gap between LCD and front bezel must be <= 1.0mm
4.2 Panel Offset
Panel Offset: Panel disposition tolerance inside the front bezel must be <=1.0mm
4.3 Horizontal tilt
Horizontal tilt between front bezel & LCD shall be <= 1.0mm
5. CONNECTORS
5.1 Video Connection
The monitor is equipped with a 15 pin mini D-SUB connector.
5.2 PIN Assignment
5.2.1 15 pin mini D-Sub connector
The PIN assignment of the 15 pin mini D-SUB connector / cable is as follows:
LPL
LM201WE3-TLH2
1680x1050 (WSXGA+)
511.133
459.4 x 296.4 x 16.5 (mm)
0.258 x 0.258
Anti-Glare
16.7M colors
4 CCFL
160 for H/V (Typ.)
1000:1 (Typ.); 600:1 (Min)
300nit (Typ); 250nits (Min)
72%
Philips
Lusem
5ms
200VW8 LCD
CPT
CLAA201WA04
1680x1050 (WSXGA+)
433.44mm x 270.90mm
459.4 x 296.4 x 16.6 (mm)
0.258 x 0.258
Anti-Glare
16.7M colors
4 CCFL
160 for H/V (Typ.)
1000:1 (Typ.); 600:1 (Min)
300nit (Typ); 200nits (Min)
72%
TBD
TBD
5ms
63