Kenwood TK-2102G Service Manual page 4

TK-2102G
4-5. Programming Software Description
The KPG-55D (ver.4.00 or later) is the programming
software for the transceiver supplied on a CD-ROM. This
software runs under Windows 2000, XP or Vista (32-bit) on
a PC.
4
REALIGNMENT
PC
KPG-55D
(ver.4.00 or later)
Tuning cable
(E30-3216-05)
PC PC
D-SUB D-SUB
(25-pin) (9-pin)
KPG-22
Transceiver Transceiver
Fig. 1
4-6. Programming with PC
If data is transferred to the transceiver from a PC with
the KPG-55D (ver.4.00 or later), the data for each set can be
modifi ed.
Data can be programmed into the EEPROM in RS-232C
format via the SP/MIC jack.
In this mode the PTT line operate as RXD data line.
KPG-22 or KPG-22A or
KPG-22A+KCT-53U
Illustration is KPG-22
+
Gray
SP
–
Gray/Black
+
1.5D-XV Lead wire
MIC
1.5D-XV Shield wire –
PC
USB
KCT-53U
KPG-22A
KPG-22A
Transceiver