Digital Radio Setup - Kenwood DNX531VBT Instruction Manual

Return to the Top page
Radio, Digital Radio, TV

Digital Radio Setup

You can set Digital Radio related parameters.
1
Touch [ ] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [Digital Radio SETUP] in the
list.
Digital Radio SETUP screen appears.
5
Set each item as follows.
Priority
If the same service is provided by Digital Radio
during RDS reception, automatically switches
to Digital Radio. If the same service is provided
by RDS when reception of the service being
provided by Digital Radio becomes poor,
automatically switches to RDS.
54 54
PTY Watch
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
Announcement Select
Switches to the set Announcement service. For
details, see Announcement setup (P.55).
Dynamic Range Control
Adjusts the dynamic range of sound.
(Ineffective if the program being received does
not support Dynamic Range Control.)
Default is "OFF".
Antenna Power*
Sets power supply to the Digital Radio
antenna. Set to "ON" when the Digital Radio
antenna in use is equipped with a booster.
Default is "ON".
L-Band Tuning*
Sets L-band reception. When set to "ON", also
receives L-band ensembles.
* T his item can be set when in STANDBY
source.
Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
1
Touch [SET] of [Announcement Select]
in the Digital Radio SETUP screen.
The Announcement Select screen
appears.
2
Touch each Announcement list and
set on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
Return to the Top page
Radio, Digital Radio, TV
55