Connecting With External Devices; Outputting Video And Audio (Video Output) - Sharp Aquos LC-15S5H Operation Manual

Connecting with External Devices

You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the LCD TV set.
When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage.
NOTE
• For the cable, use a commercially available audio/video cable.
• PC connection is not possible.
• For more information about external device connections, see the operation manuals of your external devices.
• Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result in a malfunction.
• AV2 IN has two video input terminals, VIDEO and S-VIDEO terminals. If your external device has an S-VIDEO terminal, S-VIDEO connection
is recommended. S-VIDEO provides a finer, more detailed picture. If both terminals are connected, S-VIDEO terminal takes a priority.
• For the AV1 mode, picture can be displayed only when 480

Outputting Video and Audio (Video Output)

You can output video and audio data from the LCD TV set through the AV3 IN/OUT terminals.
• When using AV3 as an OUTPUT terminal, select "SETUP" in the Menu and set "AV3 IN/OUT" to "OUT".
(See page 20.)
• The factory setting for "AV3 IN/OUT" is "IN".
NOTE
• When using the S-VIDEO input for AV2 or COMPONENT input for AV1, no video output will be made to the AV output terminal, but audio
output will be made for connection to external audio systems.
I , 480P, 576 I , 576P,720P or 1080 I signal is received.
9