Honda NT700V Owner's Manual page 66

To alter the blinking function:
1. Turn the ignition switch ON.
2. Push and hold the SEL button (1) for more
than 2 seconds with the display in the
odometer.
The immobilizer system (HISS) indicator
(2) will flash two times to indicate that the
function has been cancelled.
The immobilizer system (HISS) indicator
will light for 2 seconds to indicate that the
function has been operated.
3. Turn the ignition switch OFF and remove
the key.
(2)
(1) SEL button
(2) Immobilizer system (HISS) indicator
56
If the system repeatedly does not recognize
the coding of your key, contact your Honda
dealer.
• The system may not recognize the keyʼs
coding if any other immobilizer key is near
the ignition switch. To make sure the
system recognizes the key code, keep
each immobilizer key on a separate ring.
• Do not attempt to alter the immobilizer
system (HISS) or add other devices to it.
Electrical problems could result, making it
impossible to start your motorcycle.
• If all keys are lost, the PGM-FI unit/ignition
control module must be replaced.
(1)