Replacing A Memory Module - Lenovo IdeaCentre B550 Hardware Maintenance Manual

Step 4. Remove the two screws that secure the computer stand to the chassis, then slide the computer
stand out as shown.
Step 5. To reinstall the computer stand:
a. Line up the computer stand with the mounting slots in the chassis and slide it back into
position.
b. Secure the stand to the chassis with the 2 screws.

Replacing a memory module

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Attention: It may be helpful to place the computer face-down on a soft flat surface for this procedure.
Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen
from scratches or other damage.
To replace a memory module
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4. Remove the rear cover. Refer to "Removing the rear cover".
1 2 3
.
Chapter 8 Replacing hardware
31