Weber Vieluxe 27 Built-In Grill Installation Manual page 7

BUILT-IN GRILL
INSTALLATION
CAUTION: Use two people to lift and install the
Vieluxe ® grill.
1) Lift the grill out of the packaging.
2) Make sure that the Adjustable Feet are fully extended
and secure before setting grill in place.
3) Push the grill into the "island" structure making sure
that the grill frame does not rest on the top of the
"island" structure. Make sure the grill is resting on it's
Adjustable Feet only.
4) Guide the gas line through the access hole in the
grill frame while installing the grill.
Grill Frame
Adjustable Feet
Foot fully extended
and secured
Gas Line
Foot not fully extended
7
5) Lower the grill down by adjusting the feet until the grill
frame is resting on the "island" countertop.
Note: Make sure that the grill is level on the
"island" countertop.
Grill Frame
6) Once the grill is level with the top of the "island"
structure, apply a bead of silcon sealant around the
perimeter and front sides of the grill that is in contact
with the "island" structure. This will prevent moisture
seepage. The sealant you use must have a
temperature rating above 120° F.
Countertop
"Island" Structure
Silicon
Sealant