GE Spacemaker JVM152H Use And Care Manual page 32

PROBLEM
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL N~ STA~
OVERCOOKED OR
UNDERCOOKED
POSSIBLE CAUSE AND REMEDY
fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
A
reset circuit breaker.
Make sure 3-prong plug on oven is fully inserted into wall receptacle.
Door not securely closed,
START must be touched after entering cooking selection.
Make sure you have entered cooking time afier touching TIME COOK I or 11.
CLEAR/OFF was touched accidentally. Reset cooking program and touch START.
Temperature probe not inserted properly or not being used during Auto Roast or
Temp Cook.
Make sure you have entered a desired finished temperature after touching TEMP
COOK/HOLD.
Make sure you entered a code number after touching AU~ functions.
Cooking times may vary because of starting food temperature, food density
or amount of foods in oven. Touch TIME COOK I or II and additional cooking
time for completion.
Incorrect power level entered. Check cookbook for recommended power
level, or changing levels during cooking if necessary.
Dish was not rotated, turned or stirred. Some dishes require specific instructions.
Check cookbook or recipe for instructions.
Too many dishes in oven at same time. Cooking time must be increased
when cooking more than one food item. Check cookbook for recommendation on
increased time.
time in Auto Cook function.
microwaving. Therefore, it is recommended that you let the vegetables stand for up to
5 minutes depending on size and density of pieces.
. Oven door was opened during "AU~" cycle of Auto Cook function.
Probe not inserted properly into meat or dish when using Temp Cook or
Auto Roast functions. Check cookbook or Auto Roast section of this book
for specific instructions.
32