Minute/Second Timer; Delayed Cooking; Hold Time - GE Spacemaker JVM152H Use And Care Manual

How to Use the Minute/Second ~mer
The MIN/SEC TIMER has three
timing functions:
It operates as a minute timer.
. It can be set to delay cooking.
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to ~me a 3-Minute
Phone Call
1. Touch MIN/SEC TIMER pad.
The display shows ": O" and
"ENTER TIME" flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows "3:00" and "TIME:'
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes "End," and display shows
time of day.
Programming a Holding
The Minute/Second Timer can also
be used to program a holding time
between rnicmve cooking functions.
The time can range from one saond
to 99 minutes and 99 seconds. A
holding or standing time maybe
requested in some of your own
recipes or cookbook.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch TIME COOK I
or TEMP COOK/HOLD and enter
cook time or temp. Touch MIN/SEC
to delay cooking. Touch START.
Timer will count down to zero and
cooking will begin. When delaying
temperature cooking, be sure that
probe is in food before pressing
START.
How to ~me Defrost, Hold
and ~me Cook
Let's say you want to defrost a fromn
casserole for 15 minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here's how to do it:
Step 1: Take casserole from freezer
and place in oven.
Step 2: Touch TIME DEFROST pad.
The display shows ": O" and
"POWER 3V' "ENTER DEF
TIME" flashes.
Step 3: Touch pads 1,5,0 and O for
15 minutes defrosting time. "15:00"
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching
the POWER LEVEL pad and the
desired power level.)
T :::: R
Step 4: Set holding or standing
time by touching M~/SEC T~ER.
The display shows ": O" and
"ENTER TIME" flashes.
Step 5: Touch 1,0,0 and O to hold
for ten minutes. "10:00'7 appears on
display and "TIME" flashes.
Step 6: Touch TIME COOK I pad.
The display shows ": O" and
"POWER 10V' "ENTER COOK
TIME 1" flashes.
Step 7: Touch 2,5,0 and O for
twenty-five minutes of cooking time.
"COOK TIME 1" flashes, "25:00"
Step 8: Touch START. "DEF TIME"
and "U:OO" counting down show on
display. As each function is
automatically performed, oven
display shows instructions entered
and the function.
Step 9: When time is up, the
oven signals, flashes "End" and
shuts off.
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Time Defrost and
amount of time. Then program a
holding time (example in steps 4
and 5 at left). Be sure to put the
thawed dish in the refrigerator
promptly.
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to Defrost for 4 minutes,
Hold/Time for 2 minutes, and then
Defrost for 6 minutes. In this case, the
oven would Defrost for 6 minutes
and Hold/Time for 2 minutes.