Light Bulb Replacement; Cooktop Light; Night Light - GE SpacemakerXL JVM1450 Owner's Manual

950 watts
Hide thumbs Also See for SpacemakerXL JVM1450:
Table of Contents

Advertisement

Helpful Information

Light Bulb Replacement

Cooktop Light/

Night Light

Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB36X10003), available
from your GE supplier.
Oven Light
Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB36X10003), available
from your GE supplier.
36
1 To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull the
plug.
2 Remove the screw at the
front of the light cover
and lower the cover.
REMOVE SCREWS
1 To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull the
plug.
2 Remove the top grille by
taking out the 2 screws
that hold it in place.
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
4 Replace the screw.
Connect electrical power
to the oven.
3 Next, remove the screw
located above the door
near the center of the
oven that secures the
light housing.
4 Replace the screw.
Connect electrical power
to the oven.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spacemakerxl jvm1451

Table of Contents