Adjusting The Height Of The Iv Pole; Cleaning The Iv/O2 Holder - Invacare Insignia Owner's Operator And Maintenance Manual

DETAIL "A"
IV/O2 Holder

Adjusting the Height of the IV Pole

NOTE: For this procedure, refer to FIGURE 11.7.
1. Loosen the height adjustment knob on the IV/O2
holder.
2. Adjust the IV pole to the desired height.
3. Retighten the height adjustment knob to secure the IV
pole in place.

Cleaning the IV/O2 Holder

The user and O2 cylinder MUST be removed from the wheelchair when cleaning the O2 holder.
Otherwise, injury or damage may occur if cleaning agents come in contact with the O2
regulator.
1. Remove the user, any I.V. medication and the O
2. The telescoping I.V. pole/O2 holders clean easily with any household glass type cleaner.
3. After the cleaning solution has dried, it is safe for the user to re‐occupy the wheelchair.
Part No. 1163197
Upper
Cylinder
Bracket
O2 Cylinder
Lower
Cylinder
Bracket
NOTE: IV/O2 holder shown is not
installed on the wheelchair for clarity.
FIGURE 11.6 Using the IV/O2 Holder
Adjustment
WARNING
cylinder from the wheelchair.
2
47
DETAIL "B"
IV/O2 Holder
Height
Knob
FIGURE 11.7 Adjusting the Height of the IV Pole
SECTION 11—OPTIONS
Upper Cylinder
Bracket
Locking Knob
O2 Cylinder
IV Pole
IV/O2 Holder
Insignia
™