Programmed Play - Durabrand CD-915 Operating Instructions Manual

PROGRAMMED PLAY

The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program Number
Track Number (song number)
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.Press the PROGRAM button.
The word PROG will flash in the display.
Program number
2.Press the SKIP/TUNING button (
or ) t o se l ect tra ck n um be r 3
(example). PROG will flash in the displa
Track number
Programming Example:
1 2 3
3 8
5
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
PLAY/PAUSE to begin programmed
play. PROG changes to be steadily in the
display, and music begins.
y.
NOTE:
- The player will stop automatically after
al l pr ogra m m ed tr acks hav e be en
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY/
PAUSE button to re-start normal play.
Your programmed memory will be
lost:
•
When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
•
When the power is off.
7
4 5 6
1 2 4
IB-CD915(CDR25J-60K8)-WM-E-042004
etc.
7 8
etc.
1 1