Programmed Play - Durabrand CD-896 Operating Instructions Manual

PROGRAMMED PLAY

The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program Number
Track Number (song number)
During programming, the symbol PROG flashes in the display. To program songs to
play in your preferred order, follow steps below:
1. Press the PROGRAM button.
P
The symbol PROG and "
in the display.
PROG
Program number
2. Press t he SKI P/ SEAR CH b ut to n
( or ) to select track number 3
(example). PROG and track number
"03" will flash in the displa
PROG
Track number
IB-CD896(CDX85KR-60B3)-WM-E-111605.pmd
Programming Example:
1 2 3
3 5 8
3. Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection
of track.
" will flash
4. Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5. After programming is finished, press the
PLAY/PAUSE button to begin programmed
play. The symbol PROG changes to be
steadily on in the display, and music
begins to play in the order you
programmed.
y.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP/OFF button once. Then you may
press t he PLAY/ PAUSE bu tt on t o
restart normal play.
Your programmed memory will be
lost:
•
When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
•
When the power is shut off or the CD
door is opened.
11
12
4 5 6 7
1 2 4 1
PROG
IB-CD896(CDX85KR-60B3)-WM-E-070706
7/7/2006, 12:26 PM
etc.
8
etc.
1