Locating Components - Lenovo ThinkCentre Hardware Maintenance Manual
Machine types: 3026, 3029, 3039, 3054, 3137, 3139, 3149, 3219, 3245, 3246, 3245, 3282, 3319, 3349, 3394, 3421, 3491, 3544, 3627, 3652, 3699, 3769, 3878, 3934, 4972, 4992, 5132, 5206, 5261, 5267, 5297, 5325, 5384, 5391, 5450, 5472, 5474, 5485, 5498, 5536,
Hide thumbs
Also See for ThinkCentre:
- Hardware maintenance manual (546 pages) ,
- Safety and warranty manual (265 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
To open the computer cover, do the following:
1. Remove any media from the drives and turn off all attached devices and the computer.
2. Disconnect all power cords from electrical outlets.
3. Disconnect the power cords, Input/Output (I/O) cables, and any other cables that are connected to
the computer. See "Locating connectors on the front of the computer" on page 101 and "Locating
connectors on the rear of the computer" on page 101.
4. Remove any locking device that secures the computer cover, such as an integrated cable lock.
5. Press the cover-release buttons on the sides of the computer and pivot the computer cover upward.
Figure 40. Opening the computer cover
Locating components
Figure 41 "Component locations" on page 104 shows the locations of the various components in your
computer. To open the computer cover, see "Opening the computer cover" on page 102.
.
Chapter 9
Replacing FRUs (Machine types: 3026, 3039, 3137, 3149, 3245, 3269, 3319, 3394, 3491, 3627, 3699, 3878,
4972, 5132, 5261, 5297, 5391, 5472, 5485, 5536, 5548, 5567, 5864, and 6213.)
103
Advertisement
Table of Contents
