Dc3 Drive Cage And Ports And Cabling - HP 3PAR StoreServ 7200 2-node Manual

Fibre Channel cables connect the ports in the drive cage to the ports on the controller nodes. Each
cable is labeled to indicate the ports it uses.
NOTE: Daisy chaining is not supported for the DC4 drive cages.
Figure 17 DC4 Drive Cage
Table 7 DC4 Drive Cage Components
Item
1
2
3
4
5

DC3 Drive Cage and Ports and Cabling

The DC3 drive cage contains 16 drive bays at the front, each accommodating the appropriate
plug-in drive magazine module. The 16 drive bays are arranged in four rows of four drives.
Figure 18 (page 65)
Figure 18 DC3 Drive Cage (Front View)
Description
FC-AL Port B0
FC-AL Port A0
FC-AL Modules
FC-AL Port A1
FC-AL Port B1
shows the front view of a DC3 drive cage.
Drive Cage/Enclosure Models 65