Replacing A Memory Module - Lenovo H5 Series User Manual

Replacing a memory module

To replace a memory module:
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Locate the memory module connectors. Refer to "Locating components".
3. Remove the memory module being replaced by opening the retaining clips as
shown.
4. Position the new memory module over the memory connector. Make sure the
notch on the memory aligns correctly with the connector key
system board. Push the memory module straight down into the connector until
the retaining clips close.
5. Refer to "Completing the installation".
46
User Guide
on the