Automatic Rinse/Self-Cleaning Cycle - Philips Saeco XSmall HD8743 User Manual

2 Turn the control dial clockwise to the "
onds.
3 When water steadily comes out and the " " light ashes slowly, rotate
the control dial counter-clockwise back to the " " position. The ma-
chine is in warm-up mode (light " " ashes slowly).

Automatic rinse/self-cleaning cycle

When warm-up is complete, the machine automatically performs rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
2 The indicator lights ash counter clock wise.
3 Wait for the cycle to nish automatically.
+
You can stop dispensing as well, by pressing either "
Blinking
4 When the above steps are complete, check that the light " " shines
steadily.
Steady on
Note:
ENGLISH
" position and wait few sec-
" or " " button.
11