Mad Restore; Port Group Interface - HP 6125XLG Command Reference Manual

Examples
# Enable ND MAD on VLAN-interface 3.
<Sysname> system-view
[Sysname] interface vlan-interface 3
[Sysname-Vlan-interface3] mad nd enable
You need to assign a domain ID (range: 0-4294967295)
[Current domain is: 0]: 1
The assigned
Related commands
irf domain

mad restore

Use mad restore to restore the normal MAD state of the IRF fabric in Recovery state.
Syntax
mad restore
Views
System view
Predefined user roles
network-admin
Usage guidelines
When MAD detects that an IRF fabric has split into multiple IRF fabrics, it sets one of the IRF fabrics to the
Detect state and other IRF fabrics to the Recovery state.
The Detect-state IRF fabric is active and can continue to forward traffic.
•
The Recovery-state IRF fabrics are inactive. MAD shuts down all their physical ports except the IRF
•
ports and the ports manually configured to not shut down.
If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to restore
an IRF fabric in Recovery state to take over the active IRF fabric role.
Examples
# Restore the normal MAD state of the IRF fabric in Recovery state.
<Sysname> system-view
[Sysname] mad restore
This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y
Restoring from multi-active conflict state, please wait...

port group interface

Use port group interface to bind a physical port to an IRF port.
Use undo port group interface to remove the binding of a physical port and an IRF port.
Syntax
port group interface interface-type interface-number
domain ID is: 1
24