HP 6125XLG Configuration Manual page 11

Blade switch mce configuration guide
Table of Contents

Advertisement

Step
5.
(Optional.) Configure the
default cost value for the
redistributed routes.
For more information about RIP, see Layer 3—IP Routing Configuration Guide.
Configuring OSPF between an MCE and a VPN site
An OSPF process can belong to a single VPN instance. If you create an OSPF process without binding
it to a VPN instance, the process belongs to the public network.
Binding OSPF processes to VPN instances can isolate routes of different VPNs. An OSPF process can
belong to only one VPN instance, but one VPN instance can use multiple OSPF processes to advertise the
VPN routes.
An OSPF process that is bound with a VPN instance does not use the public network router ID configured
in system view. Therefore, you must configure a router ID when starting the OSPF process.
For more information about OSPF, see Layer 3—IP Routing Configuration Guide.
To configure OSPF between an MCE and a VPN site:
Step
1.
Enter system view.
2.
Create an OSPF process for a
VPN instance and enter OSPF
view.
3.
(Optional.) Configure the
OSPF domain ID.
Command
default cost value
Command
system-view
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
domain-id domain-id [ secondary ]
8
Remarks
If you do not specify a default cost
value, the default cost value is 0.
Remarks
N/A
Perform this configuration on the
MCE. On the VPN site, create a
normal OSPF process.
The default domain ID is 0.
Perform this configuration only on
the MCE.
The domain ID of an OSPF process
is included in the routes generated
by the process. When an OSPF
route is redistributed into BGP, the
OSPF domain ID is included in the
BGP VPN route and delivered as a
BGP extended community
attribute.
An OSPF process can be
configured with only one domain
ID. Domain IDs of different OSPF
processes are independent of each
other.
All OSPF processes of a VPN must
be configured with the same
domain ID for routes to be correctly
advertised. OSPF processes on PEs
in different VPNs can be
configured with domain IDs as
desired.

Advertisement

Table of Contents
loading

Table of Contents