HP 6125XLG Configuration Manual page 15

Blade switch mce configuration guide
Table of Contents

Advertisement

Configuring static routing between an MCE and a PE
Step
1.
Enter system view.
2.
Configure a static route
for a VPN instance.
3.
(Optional.) Configure
the default preference for
static routes.
Configuring RIP between an MCE and a PE
Step
1.
Enter system view.
2.
Create a RIP process for
a VPN instance and
enter RIP view.
3.
Enable RIP on the
interface attached to
the specified network.
4.
Redistribute the VPN
routes.
5.
(Optional.) Configure
the default cost value
for the redistributed
routes.
For more information about RIP, see Layer 3—IP Routing Configuration Guide.
Configuring OSPF between an MCE and a PE
Step
1.
Enter system view.
2.
Create an OSPF process for a
VPN instance and enter OSPF
view.
3.
Disable routing loop
detection.
Command
system-view
ip route-static vpn-instance
s-vpn-instance-name dest-address { mask |
mask-length } { next-hop-address [ public ]
[ track track-entry-number ] | interface-type
interface-number [ next-hop-address ] |
vpn-instance d-vpn-instance-name
next-hop-address [ track track-entry-number ] }
[ permanent ] [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
ip route-static default-preference
default-preference-value
Command
system-view
rip [ process-id ] vpn-instance
vpn-instance-name
network network-address
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name | tag tag ] *
default cost value
Command
system-view
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
vpn-instance-capability simple
12
Remarks
N/A
By default, no static route is
configured.
The default setting is 60.
Remarks
N/A
N/A
By default, RIP is disabled on
an interface.
By default, no route of any
other routing protocol is
redistributed into RIP.
If you do not specify a default
cost, the default cost is 0.
Remarks
N/A
N/A
Routing loop detection is enabled.
You must disable routing loop
detection for a VPN OSPF process
on the MCE. Otherwise, the MCE
cannot receive OSPF routes from
the PE.

Advertisement

Table of Contents
loading

Table of Contents