Listening To The Ipod, Iphone Or Ipad; Listening To A Cd Or Mp3/Wma Disc - Sharp GX-M10H(OR) Operation Manual

Listening to the iPod, iPhone or iPad

(continued)
Navigating the iPod, iPhone or iPad
menus
1
Press the MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to
previous menu.
2
Use the TUNING ( or
the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the volume
on the iPod, iPhone or iPad units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically pause the
playback.
Various iPod, iPhone and iPad functions
Function Main unit
DOCK USB
Play
iPod USB
Pause
iPod USB
Track
up/
down
Fast
forward/
reverse
Display ____
Repeat
____
Shuffl e
____
) button to select an item on
Remote Operation
control
DOCK USB
Press in the pause
iPod USB
mode.
Press in the
iPod USB
playback mode.
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the
/ button to start the
desired track.
Press and hold
down in the playback
mode.
Release the button
to resume playback.
Press to toggle
display content.
Press to toggle
repeat mode.
Press for more than
2 seconds to toggle
shuffl e mode.
Function Main unit
Dock/USB
Menu
____
Enter ____
Cursor ____
Up/
Down

Listening to a CD or MP3/WMA disc

This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA fi les, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by signifi cant compression from the original
audio source with very little loss in sound quality.
This system supports MPEG 1 Layer 3 and VBR fi les.
During VBR fi le playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA fi les are Advanced System Format fi les that include
audio fi les which are compressed with Windows Media Audio
codec. WMA is developed by Microsoft as an audio format fi le
for Windows Media Player.
"MP3" and "WMA" indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD / button on the remote control or the
main unit to select CD function.
3 Open the CD compartment by pushing the CD compartment
open knob to the area marked ' '.
4 Place the disc on the spindle, label side up.
9
Remote Operation
control
Dock/USB
Press to view the
iPod menu during
iPod function.
Press to confi rm the
selection.
Press to select the
iPod menu.
ON/STAND-BY
CD
PORTABLE MUSIC BOOMBOX GX-M10
TIMER
REMOTE
SENSOR