Table of Contents
Advertisement
6. Click the Encryption tab to set the
WiFi-b™ encryption if the selected
AP has an enabled WEP encryption.
Refer to the Site Survey window to
determine whether the selected AP
has an enabled (ON) or disabled
(OFF) WEP encryption. Refer to page
4-6 on how to configure WEP
encryptions.
7. To check if WiFi-b™ is associated
with the selected AP, click the Status
icon in the property window, then
select the Status tab. Look for the
Associated State field to confirm.
®
Windows
XP OS
Do any of the following to set your WiFi-b™ in station mode:
Enter the Wireless Settings utility
1. Double-click the Control Center icon
in the Windows taskbar to open the
Wireless Settings utility.
2. Click the Config icon in the property
window, then select the Soft AP tab.
Select Station Mode.
4-12
ASUS WiFi-b™ Card
Advertisement
Table of Contents
