Table of Contents
Advertisement
Before installing the WiFi-b™ card, make sure that your system meets the
following requirements.
•
ASUS motherboard with Wi-Fi slot
•
Intel
®
Pentium™ 4 or AMD K7/K8 system
•
Minimum 64MB system memory
®
•
Windows
98SE/2000/ME/XP operating system
•
CD-ROM drive for software and drivers installation
The following ASUS motherboards support the WiFi-b™ card: P4C800-E Deluxe,
P4C800 Deluxe, P4C800, P4P800 Deluxe, P4P800, P4P800S-E Deluxe, P4P800S,
P4P8X, P4S800-D Deluxe, P4S800D, P4S800, K8V Deluxe, A7N8X-E Deluxe, and
A7V600. Visit the ASUS website for an updated list of motherboards with Wi-Fi slot.
Notes for P4P800 Deluxe/P4C800 Deluxe/P4P800/P4C800/P4C800-E Deluxe
motherboards:
•
Update the BIOS before installing the WiFi-b™ card. Download the latest BIOS
file from the ASUS website.
•
Update the 3Com utilities to V.046 before installing the WiFi-b™ card. The 3Com
utility update is available in the WiFi-b™ support CD.
•
The PCI slot nearest the WiFi slot may not be used simultaneously with the Wi-Fi
slot. If a PCI card is installed on this slot, transfer it to another PCI slot before
installing WiFi-b™.
Before handling the card, touch a bare metal portion of your PC to discharge static
electricity from your body. Wear a wrist strap grounded to the PC chassis when
handling the card.
The PCI5 and the Wi-Fi slot may not be used simultaneously on certain
motherboards. Check your motherboard documentation for this limitation.
Follow these instructions to install the WiFi-b™ card in your system.
1. Make sure that the PC is turned off. Unplug the power cord from the electrical
socket.
2. Remove the PC cover.
3. Locate the Wi-Fi slot. Refer to your motherboard documentation for the Wi-Fi
slot location.
4. Remove the rear panel bracket opposite the Wi-Fi slot. Keep the screw
for later use.
2-2
ASUS WiFi-b™ Card
Advertisement
Table of Contents
