Asus CUV4X-ME User Manual page 35

3. HARDWARE SETUP
12) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT: This feature requires that Wake-On-Ring features are enabled
(see 4.4.3 Power Management) and that your system has an ATX power supply
with at least 720mA +5V standby power.
®
CUV4X-ME
CUV4X-ME Wake-On-Ring Connector
13) IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet's IDE activity LED. Read and
write activity by devices connected to the Primary or Secondary IDE connectors
will cause the LED to light up.
®
CUV4X-ME
CUV4X-ME IDE Activity LED
ASUS CUV4X-ME User's Manual
WOR
1 2
Ground
RI#
IDELED
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
35