Set Clock; Turn On - Philips DCB2070 User Manual

Set clock

1
Press to switch the unit to standby
mode.
» --:-- is displayed.
2
Press and hold CLOCK SET on the
remote control for two seconds.
» [SET CLOCK] (set clock) scrolls on
the display, and then 12 or 24 hour
format blinks.
3
Press / repeatedly to select hour
format.
4
Press CLOCK SET to confirm.
5
Repeat steps 3-4 to set the hour and
minute respectively.
6
Repeat steps 3-4 to select whether to
synchronize time of this unit with DAB+
stations.
[DAB TIME SYNC [N] ]: time
•
synchronization is deactivated.
[DAB TIME SYNC [Y] ]: the unit
•
synchronizes time from the DAB+
stations automatically.
Note
•
The accuracy of the transmitted time depends on the
DAB+ station that transmits the time signal.
•
If the system is idle for 90 seconds, the unit exits clock
setting mode automatically.
EN
10

Turn on

Press .
» The unit switches to the last selected
source.
Note
•
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.