Get Started; Placement; Prepare Fm/Dab+ Antenna; Prepare The Remote Control - Philips DCB2070 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Placement

You can place the unit on a flat surface or
mount the unit on a wall.
Mount on a wall
See the wall mounting instructions included in
the package.

Prepare FM/DAB+ antenna

For better reception, fully extend and adjust the
position of the FM/DAB+ antenna.
Note
•
To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
To install the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
a
b

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the power adapter, make sure that
you have completed all other connections.
Note
•
The type plate is located at the back of the unit.
Connect the power adapter to:
• the DC IN socket on the main unit.
• the wall socket.
c
EN
9