Related Manuals for Toshiba C660 series
Summary of Contents for Toshiba C660 series
- Page 1 User’s Manual Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series computers.toshiba-europe.com...
-
Page 2: Table Of Contents
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Table of Contents Getting Started Chapter 1 Equipment checklist........1-1 Getting Started . - Page 3 Writing CD/DVDs......... . 4-9 TOSHIBA VIDEO PLAYER ....... . . 4-15 Media care .
-
Page 4: Specifications
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Specifications Appendix A Display Controller and Video mode Appendix B Information for Wireless Devices Appendix C AC Power Cord and Connectors Appendix D Legal Footnotes Appendix E If your computer is stolen Appendix F Glossary Index User’s Manual... - Page 5 Devices, Inc. Windows, Microsoft and Windows logo are registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
-
Page 6: Fcc Information
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus... -
Page 7: Fcc Conditions
This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet. -
Page 8: Working Environment
This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments". TOSHIBA do not approve the use of this product in working environments other than the above mentioned "Residential, commercial and light industry environments". -
Page 9: Video Standard Notice
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series GOST VCCI Class B Information Video Standard notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND... - Page 10 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators...
-
Page 11: Following Information Is Only For Turkey
The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation. -
Page 12: Optical Disc Drive Safety Instructions
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Optical disc drive safety instructions Be sure to check the precautions at the end of this section. ■ The DVD Super Multi drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. - Page 13 HITACHI-LG Data Storage, Inc. ■ DVD Super Multi GT30N/GT30F Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINATO-KU,TOKYO,108-0022 JAPAN TOSHIBA SAMSUNG STORAGE TECHNOLOGY ■ DVD Super Multi TS-L633F/TS-L633W TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 416, MEATAN-3 DONG, YEONGTONG-GU, SUWON CITY, GYEONGGI, 443-742, KOREA User’s Manual...
- Page 14 Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
-
Page 15: Chapter 1 Getting Started
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Preface Congratulations on your purchase of this computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting. - Page 16 Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Icons Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information Keys The keyboard keys are used in the text to describe many computer operations.
- Page 17 Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Terminology This term is defined in this document as follows: Start The word "Start" refers to the " " button in ® Windows HDD or Hard disk Some models are equipped with a "Solid State drive Drive (SSD)"...
-
Page 18: General Precautions
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. - Page 19 Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series To keep your computer in prime operating condition, protect your work area from: ■ Dust, moisture, and direct sunlight. ■ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.
-
Page 20: Instruction Manual For Safety And Comfort
Satellite C660/C665/C660D/C665D Satellite Pro C660/C660D Series Mobile phones Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use. -
Page 21: Equipment Checklist
Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use. - Page 22 Getting Started ■ TOSHIBA Assist ■ TOSHIBA ConfigFree™ ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition (Is preinstalled with some models) ■ TOSHIBA Bulletin Board ■ TOSHIBA ReelTime ■ TOSHIBA Resolution+ Plug-in For Windows Media Player ■ TOSHIBA Speech System (Is preinstalled with some models.) ■...
-
Page 23: Connecting The Ac Adaptor
Getting Started ■ Use a virus-check program and make sure it is updated regularly. ■ Never format storage media without checking its content - formatting destroys all stored data. ■ It is a good idea to periodically back up the internal hard disk drive or other main storage device to external media. - Page 24 ■ Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
- Page 25 Getting Started Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the right of the computer.
-
Page 26: Opening The Display
Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity. -
Page 27: Turning On The Power
Getting Started Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information. -
Page 28: Shut Down Mode
Getting Started Shut Down Mode When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on. 1. If you have entered data, either save it to the hard disk drive or to other storage media. - Page 29 Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, click Start Control Panel System and Security Power Options). ■ To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time.
-
Page 30: Hibernation Mode
Getting Started Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. -
Page 31: System Recovery Options
Getting Started Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below: 1. Click Start and click the Control Panel. 2. -
Page 32: System Recovery
Getting Started System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes tools to repair startup problems, run diagnostics or restore the system. See the Windows Help and Support content for more information about Startup Repair. - Page 33 Getting Started A recovery image of the software on your computer is stored on the hard disk drive, and can be copied to either DVD or USB Flash Memory by using the following steps: 1. Select either blank DVD or USB Flash Memory. The application will allow you to choose from a variety of different media onto which the recovery image can be copied including DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash Memory.
- Page 34 1. Turn off your computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.
- Page 35 Getting Started Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. * Please note that this service is not free-of-charge. 1. Visit https://backupmedia.toshiba.eu on the Internet. 2. Follow the on-screen instructions.
-
Page 36: Chapter 2 The Grand Tour
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Appendix E. -
Page 37: Left Side
The Grand Tour Keep foreign metal objects, such as screws, staples and paper clips, out of the Bridge media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Left side The following figures show the computer’s left side. - Page 38 The Grand Tour LAN jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX). Some models are equipped with a Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
-
Page 39: Right Side
The Grand Tour Right side The following figure shows the computer’s right side. 1. Optical disc drive 3. Security lock slot 2. DC IN 19V jack 4. Universal Serial Bus (USB 2.0) port* The right side of the computer * Provided with some models. Product appearance depends on the model you purchased. -
Page 40: Underside
The Grand Tour Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. 1. Battery lock 4. Memory module slot 2. Battery pack 5. -
Page 41: Front With The Display Open
The Grand Tour Front with the display open This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. 1. Web Camera* 7. - Page 42 You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
-
Page 43: Indicators
The Grand Tour Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer. For more information, please refer to the Using the Touch Pad section in Chapter 4, Operating Basics. Touch Pad control The control buttons located below the Touch Pad buttons... -
Page 44: Optical Disc Drives
The Grand Tour Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditions: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. ■... -
Page 45: Writable Discs
Writable discs This section describes the types of writable CD/DVD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. - Page 46 The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
-
Page 47: Chapter 3 Hardware, Utilities And Options
Processor Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs TOSHIBA Utilities PC Diagnostic Tool. - Page 48 Hardware, Utilities and Options Video RAM The memory in a computer's graphics adaptor, used to store the image displayed on a bitmap display. The amount of Video RAM available is dependent on the computer's system memory. Start Control Panel Appearance and Personalization Display Adjust...
-
Page 49: Optical Disc Drive
The size of the hard disk drive or Solid State Solid state drive Drive varies depending on the model. To check which type of HDD/SSD is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs TOSHIBA Utilities PC Diagnostic Tool. - Page 50 Hardware, Utilities and Options Display The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. Display panel 39.6cm (15.6") TFT LCD screen, 16 million colors, with the following resolution: ■...
- Page 51 You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
-
Page 52: Special Features
For more information regarding Wireless LAN, please refer to the Legal Footnotes section in Appendix E. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures. - Page 53 Hardware, Utilities and Options HDD automatic power This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options.
-
Page 54: Utilities And Applications
README.TXT file (if applicable). You may not have all the utilities or applications listed below depending on the model you purchased. TOSHIBA Power TOSHIBA Power Saver provides you with the Saver features of more various power supply managements. User’s Manual... - Page 55 TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way to modify selected system functions. ■ Hot key function...
- Page 56 Hardware, Utilities and Options TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the identification of communication problems and allow the creation of profiles if you need to switch between different locations and communication networks.
- Page 57 The plug-in lets you upconverts wmv and mp4 Plug-in For Windows videos on Windows Media Player. Media Player For more information, please refer to the TOSHIBA Resolution+ Plug-in for Windows Media Player Help. To access it, click Start All Programs TOSHIBA...
-
Page 58: Optional Devices
Controller TOSHIBA Media Controller. For more information, please refer to the TOSHIBA Media Controller Help. TOSHIBA Speech The TOSHIBA Speech System consists of a System voice-composition application (text-to-speech) that analyzes documents and reads them aloud, and a speech-recognition application that recognizes the words you speak into a microphone. -
Page 59: Bridge Media Slot
Hardware, Utilities and Options Bridge media slot The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. -
Page 60: Card Care
Hardware, Utilities and Options ■ SD, SDHC and SDXC memory cards appear the same externally. However, the logo on SD, SDHC and SDXC memory cards is different, so pay careful attention to the logo when purchasing. ■ The SD memory card logo is ( ■... -
Page 61: Memory Card Care
Hardware, Utilities and Options ■ The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. ■ Do not leave a card partially inserted in the slot. Press the card until you hear it click into place. -
Page 62: Removing A Memory Media
Hardware, Utilities and Options ■ Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove ■ When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. -
Page 63: Additional Memory Module
Use a point size 0 Phillips screwdriver to remove and fasten the screws - the use of an incorrect screwdriver can damage the screw heads. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. - Page 64 Hardware, Utilities and Options 5. Loosen the screws securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. Use a point size 0 Phillips screwdriver. 6.
- Page 65 Hardware, Utilities and Options ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. ■...
-
Page 66: Removing A Memory Module
Hardware, Utilities and Options Removing a memory module To remove the memory module, follow the steps as detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to Turning off the power section in Chapter 1, Getting Started required). -
Page 67: External Monitor
Hardware, Utilities and Options External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps as detailed below: Connecting the monitor cable 1. Turn the computer's power off. 2. -
Page 68: Connecting The Hdmi Out Port
Hardware, Utilities and Options HDMI Devices An HDMI monitor can be connected to the HDMI out port on the computer. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors have not been confirmed, some HDMI monitors may not function properly. -
Page 69: Settings For Display Video On Hdmi
Hardware, Utilities and Options Settings for display video on HDMI To view video on the HDMI device,be sure to configure the following settings otherwise you may find that nothing is displayed. ■ Be sure to use the FN + F5 HotKey to select the display device before starting to play video. -
Page 70: Optional Accessories
For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: DDR3-1066/1333 A 1 GB, 2 GB or 4 GB memory module (DDR3-... -
Page 71: Chapter 4 Operating Basics
Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. -
Page 72: Web Camera
You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph. -
Page 73: Using The Toshiba Face Recognition
Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility. - Page 74 To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start All Programs TOSHIBA Utilities Face Recognition. ■ The Registration screen is displayed for a logged-in user whose face has not been registered.
- Page 75 1. To launch the help file, click the Help button in the Management screen. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ 1:N Mode Login screen: If the face authentication tile is selected by default, you can log in without using the keyboard or mouse.
-
Page 76: Using Optical Disc Drives
Operating Basics 1:1 Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition ( 4. The Select Account screen will be displayed. 5. Select the account, and click the arrow button. 6. - Page 77 Operating Basics 1. Disc tray 2. Eject button Pressing the eject button and pulling the disc tray open 3. Lay the disc, label side up, in the disc tray. 1. Laser lens Inserting a disc When the disc tray is fully opened, the edge of the computer will extend slightly over the disc tray.
- Page 78 Operating Basics 4. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the disc tray to close it. Press gently until it locks into place.
-
Page 79: Writing Cd/Dvds
You can use the DVD Super Multi drive to write data to either CD-R, CD- RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM discs. TOSHIBA Disc Creator is provided as writing software with this computer. TOSHIBA Disc Creator can be used to write data. ■... - Page 80 RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.
- Page 81 Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Panasonic Corporation (for 3x and 5x speed media) Hitachi Maxell,Ltd. (for 3x and 5x speed media) ■...
-
Page 82: When Writing Or Rewriting
CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed. - Page 83 TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.
-
Page 84: Data Verification
DVD-ROM and DVD-ROM / CD-R/RW drives cannot read this added data regardless of the operating system. ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility. -
Page 85: Toshiba Video Player
Operating Basics TOSHIBA VIDEO PLAYER Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER: Notes on use ■ "TOSHIBA VIDEO PLAYER" software is supported for playback of DVD-Video and DVD-VR. ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD-Video titles. - Page 86 Media Player, please use "TOSHIBA VIDEO PLAYER" or "Media Center" to play DVD. Display Devices & Audio ■ "TOSHIBA VIDEO PLAYER" will only run when "Colors" is set to "True color (32 bit)". Click Start Control Panel Appearance and Personalization Display Adjust resolution, click "Advanced...
-
Page 87: Media Care
Top Menu or Menu buttons, touch pad and mouse menu operations may not be able to be used. Open TOSHIBA VIDEO PLAYER HELP TOSHIBA VIDEO PLAYER features and instructions are also explained in detail in "TOSHIBA VIDEO PLAYER Help". Use the following procedure to open "TOSHIBA VIDEO PLAYER Help". -
Page 88: Sound System
Operating Basics Sound System This section describes some of the audio control functions. Adjusting System Volume You can control the overall level of sound using Windows Volume Mixer. To launch Volume Mixer, follow the steps below. 1. Right-click the Speakers icon on the Taskbar. 2. -
Page 89: Wireless Communications
Operating Basics Notes on Using the Microphone You can use the built-in or an external microphone that connects to the microphone jack to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions (built-in microphone is provided with some models). -
Page 90: Wireless Lan
■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. User’s Manual 4-20... -
Page 91: Lan
Operating Basics Bluetooth wireless technology Bluetooth wireless technology eliminates the need for cables, such as desktop computers, between your PC and other electronic devices, example of printers and mobile phones. You cannot use the computer's built-in Bluetooth functions and an external Bluetooth adaptor simultaneously. -
Page 92: Lan Cable Types
Operating Basics ■ The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. ■ The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). -
Page 93: Computer Handling
Operating Basics 1. LAN jack 2. LAN cable Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection. Disconnecting the LAN cable To disconnect the LAN cable, follow the steps as detailed below: 1. -
Page 94: Heat Dispersal
Operating Basics Moving the computer While the computer is designed for flexible day-to-day usage you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation. ■ Make sure all disk/disc activity has ended before moving the computer - check that the HDD and other indicators on the front of the computer are off. -
Page 95: Chapter 5 The Keyboard
The Keyboard Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages. -
Page 96: Hot Keys
The Keyboard This computer's keyboard is designed to provide all the features of the 104- key enhanced keyboard. Since the keyboard is smaller and has fewer keys, some of the enhanced keyboard functions must be simulated using two keys instead of one on the larger keyboard. -
Page 97: Windows Special Keys
Pressing FN + 4 increases the volume in increment. FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number"... -
Page 98: Chapter 6 Power And Power-Up Modes
Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes. -
Page 99: Monitoring Of Power Condition
Power and Power-Up Modes AC adaptor Remaining • Operates battery capacity • LED: off connected is above low battery trigger point Remaining • Operates battery capacity • LED: flashes amber is below low battery trigger point Remaining Computer shuts down battery capacity is exhausted No battery... -
Page 100: Battery
Power and Power-Up Modes Power indicator Check the Power indicator to determine the power status of the computer - the following indicator conditions should be noted: Green Indicates power is being supplied to the computer and the computer is turned on. Blinking green Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor... - Page 101 ■ The computer's RTC battery is a Lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
-
Page 102: Charging The Batteries
- the DC IN/Battery indicator will glow amber while the battery is being charged. Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Battery charging notice... -
Page 103: Monitoring Battery Capacity
Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the Taskbar ■ Via the Battery Status in the Windows Mobility Center window ■ You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. -
Page 104: Extending Battery Life
Power and Power-Up Modes Extending battery life To maximize the life of your battery packs: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps as detailed below. -
Page 105: Password Utility
3. Turn your computer over. Password Utility The password utility allows you to maintain an additional level of security and provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password. -
Page 106: Starting The Computer By Password
User Password To start the utility, point to or click the following items: Start All Programs TOSHIBA Utilities TOSHIBA Assist SECURE User password ■ Registered Click to register a password. After a password is set, you will be prompted to enter it when you start the computer. -
Page 107: Power-Up Modes
Power and Power-Up Modes Power-up modes The computer has three different power-up modes as follows: ■ Shut Down Mode: The computer will shut down without saving data - in view of this you must always save your work before you turn the computer off. -
Page 108: Chapter 7 Hw Setup
HW Setup Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer, and provides information on settings for various functions. Accessing HW Setup To run the HW Setup program, click Start... -
Page 109: User Password
HW Setup Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. Remove the password. (Default) Not Registered Set the password. A dialogue box will appear to Registered allow you to set the password. -
Page 110: Boot Setting
* In this computer, CD-ROM refers to the DVD Super Multi driver. To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. when the TOSHIBA Leading Innovation >>> screen appears, release the F12 key. - Page 111 HW Setup Boot Speed This feature allows you to select system boot-up speed. (It depends on the model you purchased.) Reduces system boot-up time. System can boot only Fast from the built-in HDD and only internal LCD and keyboard are supported during the boot process. System boots up at normal speed.
- Page 112 HW Setup Wake-up on LAN This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet (Magic packet) from the LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.
-
Page 113: Troubleshooting
Troubleshooting Chapter 8 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place. -
Page 114: Analyzing The Problem
Troubleshooting ■ Make sure all optional accessories are configured properly in the computer's setup program and that all required driver software has been loaded (please refer to the documentation included with the optional accessories for further information on its installation and configuration). -
Page 115: Hardware And System Checklist
Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer. -
Page 116: Self Test
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Setting option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■... - Page 117 Troubleshooting Computer shuts down This indicates a problem with the heat dispersal and its DC IN/Battery system - you should contact your reseller, dealer indicator is flashing or service provider. green. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator.
- Page 118 Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure its connecting terminals are clean - if necessary wipe them with a soft dry cloth lightly dipped in alcohol. Connect the AC adaptor and replace the battery, taking care to ensure that it is securely seated in the computer.
-
Page 119: Real Time Clock
BIOS setup application by using the following steps: 1. Turn on the computer while pressing the F2 key. TOSHIBA 2. Release the F2 key when the Leading Innovation >>> screen appears - the BIOS setup application will load. -
Page 120: Hard Disk Drive
Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. -
Page 121: Dvd Super Multi Drive
Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive’s disc tray is securely CD/DVD in the drive closed. Press gently until it clicks into place. Open the disc tray and make sure the CD/DVD is properly seated. -
Page 122: Pointing Device
Troubleshooting Memory Cards: SD/SDHC/SDXC Card, MultiMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options. Problem Procedure Memory Card error Remove the Memory Card from the computer occurs and then reinsert it in order to ensure it is firmly connected. -
Page 123: Usb Mouse
Troubleshooting Problem Procedure The on-screen pointer In this instance, you should initially try changing moves too fast or too the speed setting within the Mouse Control utility. slow 1. To access this utility, click Start Control Panel Hardware and Sound Mouse. -
Page 124: Usb Device
USB, you are still able to use a USB mouse and/or USB keyboard by setting the Legacy USB Support option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. - Page 125 Troubleshooting Additional memory module Please also refer to Chapter 3, Hardware, Utilities and Options, for further information on installing and removing memory modules. Problem Procedure An error will occur if a Remove the memory module from Slot B and memory module is insert it into Slot A.
- Page 126 Troubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options, and to the documentation supplied with your monitor for further information. Problem Procedure Monitor does not turn After confirming that the monitor's power switch is on, you should check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet.
- Page 127 Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. Wake-up on LAN does Make sure the AC adaptor is connected. The not work Wake-up on LAN function consumes power even when the system is off.
-
Page 128: Recovery Media
Recovery Media section in Chapter1, Getting Started. You will be directed to select "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. User’s Manual 8-16... -
Page 129: Toshiba Support
Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first. -
Page 130: Physical Dimensions
Specifications Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size 380.5 (w) x 254 (d) x 28/35.6 (h) millimeters (not including parts that extend beyond the main body). Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) -
Page 131: External Rgb Monitor Port Pin Assignment
Specifications External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply Ground Reserved Reserved Data Signal HSYNC Horizontal Sync Signal VSYNC Vertical Sync Signal Data Clock Signal I/O (I): Input to computer I/O (O): Output from computer... -
Page 132: Display Controller
Display Controller and Video mode Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode. -
Page 133: Information For Wireless Devices
The "Wi-Fi CERTIFIED™" logo is a certification mark of the Wi-Fi ® Alliance Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■... -
Page 134: Caution About Wireless Devices
If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please visit http://www.pc.support.global.toshiba.com, if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA. In Europe visit http://www.toshiba- europe.com/computers/tnt/bluetooth.htm Your Bluetooth product is not compatible with devices using Bluetooth Version 1.0B specifications... -
Page 135: Radio Regulatory Information
Information for Wireless Devices Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This product complies with the following radio frequency and safety standards. - Page 136 Information for Wireless Devices Luxembourg: Implemented General authorization required for network and service supply. Russian Limited e.i.r.p 100mW. Permitted to use only Federation: for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages...
- Page 137 Information for Wireless Devices Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
-
Page 138: Important Notice
Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations. User’s Manual... -
Page 139: Device Authorization
Information for Wireless Devices 2. Indication for Wireless LAN The indication shown below appears on this equipment. : This equipment uses a frequency of 2.4GHz. : This equipment uses DS-SS modulation. : This equipment uses OFDM modulation. : The interference range of this equipment is less than 40m. :This equipment uses a frequency bandwidth from 2,400MHz to 2,483.5MHz. -
Page 140: Radio Approvals For Wireless Devices
Information for Wireless Devices ■ Atheros AR9285 Wireless Network Adapter b/g/n(b/g) module The Name of the radio equipment: AR5B95 DSP Research, Inc. Approval Number: D081038003 ® ■ Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC b/g/n Wireless The Name of the radio equipment: RTL8188CE Japan Approvals Institute for Telecommunications Equipment Approval Number D100075001 ■... - Page 141 Information for Wireless Devices Chile China Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt El Salvador Estonia Finland France Germany Ghana Greece Guatemala Hong Kong Hungary Iceland India Indonesia Ireland Italy Japan Jordan Kazakhstan Kenya Kuwait Kyrgyzstan Latvia Lebanon...
- Page 142 Information for Wireless Devices As of Mar. 2011 Argentina Australia Austria Azerbaijan Bahrain Belgium Bolivia Bosnia and Herzegovina Brazil Bulgaria Cambodia Canada Chile China Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt El Salvador Estonia Finland France Germany Ghana...
- Page 143 Information for Wireless Devices As of Mar. 2011 Albania Australia Austria Argentina Bahrain Belgium Bolivia Bosnia and Herzegovina Bulgaria Cambodia Canada Chile China Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt El Salvador Estonia Finland France Germany Greece Guatemala...
- Page 144 Information for Wireless Devices As of Mar. 2011 Albania Algeria Angola Argentina Australia Austria Azerbaijan Bahrain Bangladesh Belarus Belgium Bolivia Bosnia and Botswana Brazil Bulgaria Herzegovina Burkina Faso Burundi Cambodia Cameroon Canada Central African Chile China Republic Colombia Comoros Costa Rica Croatia Cyprus Czech Republic Democratic...
- Page 145 Information for Wireless Devices Ukraine Uruguay Venezuela Vietnam Yemen Zambia Zimbabwe User’s Manual C-13...
-
Page 146: Ac Power Cord And Connectors
AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters... - Page 147 AC Power Cord and Connectors The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe and China. United Kingdom UL approved BS approved Australia Europe Approved by the AS approved appropriate agency Canada China CSA approved CCC approved...
-
Page 148: Legal Footnotes
Legal Footnotes Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis. - Page 149 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in Chapter 8 Troubleshooting for more information.
-
Page 150: Battery Life
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power. -
Page 151: Copy Protection
Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed. -
Page 152: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased. -
Page 153: Toshiba Theft Registration
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite C660/C665/C660D/C66 5D Satellite Pro C660/C660D Series) Model number: (e.g. - Page 154 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BD-R: Blu-ray Disc Recordable BD-RE: Blu-ray Disc Rewritable BIOS: basic input/output system...
- Page 155 Glossary FDD: floppy diskette drive FIR: fast infrared GB: gigabyte HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte...
- Page 156 Index Index controller, B-1 hinges, 2-7 AC adaptor, 3-3 opening, 1-6 additional, 3-24 screen, 2-7 connecting, 1-3 Documentation list, 1-1 DC IN 19V jack, 2-4 DVD Super Multi drive ASCII characters, 5-3 problems, 8-9 Battery Enable/Disable Wireless charging, 6-5 communication, 4-21 extending life, 6-7 Equipment checklist, 1-1 monitoring capacity, 6-6...
- Page 157 Index Hard disk drive, 3-3 LAN, 3-6, 4-21 automatic power off, 3-7 cable types, 4-22 Heat dispersal, 3-8, 4-24 connecting, 4-22 Hibernation Mode, 3-8 disconnecting, 4-23 Hot keys, 3-6 jack, 2-3 Brightness Down, 5-2 problems, 8-15 Brightness Up, 5-2 Hibernate, 5-2 Media care, 4-17 Lock, 5-2 Card care, 3-14...
- Page 158 Index Battery, 8-5 Bluetooth, 8-16 TOSHIBA Assist, 3-9 DVD Super Multi drive, 8-9 TOSHIBA Bulletin Board, 3-11 External monitor, 8-14 TOSHIBA ConfigFree, 3-10 Hard disk drive, 8-8 TOSHIBA Disc Hardware and system Creator, 3-10, 4-13 checklist, 8-3 TOSHIBA DVD-RAM Internal display panel, 8-7...