Related Manuals for Steel City 65100
Summary of Contents for Steel City 65100
- Page 1 User Manual Read and understand this manual before using machine. AIR CLEANER – SINGLE SPEED Model Number 65100 ® STEEL CITY TOOL WORKS Manual Part No. OR70251...
-
Page 3: Table Of Contents
This machine is not to be modified for any reasons. The drawings, illustrations, photographs, and specifications in this user manual represent your machine at time of print. However, changes may be made to your machine or this manual at any time with no obligation to Steel City Tool Works. -
Page 4: Warranty
2 YEAR LIMITED WARRANTY Steel City Tool Works, LLC (SCTW) warrants this SCTW machinery to be free of defects in workmanship and materials for a period of 2 years from the date of the original retail purchase by the original owner for domestic use. Granite components are warranted for 2 years based on normal use and is void if non SCTW accessories are used that cause the break or chip. -
Page 5: Warranty Card
City:______________________________________________ Online: ______________________________________________ ___ Vacuum Veneer Press ___ Wide Belt Sander Other____________________________________________ How did you first learn of Steel City Tool Works? ___ Advertisement ___ Mail Order Catalog 11. Which benchtop tools do you own? Check all that apply. ___ Web Site... - Page 6 FOLD ON DOTTED LINE PLACE STAMP SteelCityToolWorks #4 Northpoint Court Bolingbrook, IL 60440 FOLD ON DOTTED LINE...
-
Page 7: Product Specifications
(20’ x 20’ x 8’) ACCESSORIES AND ATTACHMENTS WARNING Use only accessories recommended for this machine. Contact your local Steel City dealer for accessories, or Using other accessories may cause serious injury and visit our website at: www.steelcitytoolworks.com. cause damage to the machine. -
Page 8: Feature Identification
FEATURE IDENTIFICATION Fig. 1-1 A. Air Cleaner B. Handle C. Eye-bolt D. Electrostatic Filter E. Intake Side F. Exhaust Side... -
Page 9: General Safety
GENERAL SAFETY WARNING WARNING TO AVOID serious injury and damage to the machine, read and follow all Safety and Operating Instructions before assembling and operating this machine. This manual is not totally comprehensive. It does not Exposure to the dust created by power sanding, saw- and can not convey every possible safety and opera- ing, grinding, drilling and other construction activities tional problem which may arise while using this... - Page 10 10. SECURELY anchor this unit into a supporting struc- WARNING ture when suspending it from the ceiling. Always keep a minimum of 7 feet between the bottom of the unit and the floor surface to allow for sufficient head clearance. Use only a chain rated for a mini- mum of 150 lb.
-
Page 11: Product Safety
12. USE only as described in this manual. USE acces- Regulations (OSHA). All electrical connections and sories only recommended by Steel City. wiring should be made by qualified personnel only. 13. DO NOT pull the air cleaner by the power cord. -
Page 12: Electrical Requirements
ELECTRICAL REQUIREMENTS TO REDUCE the risk of electrical shock, DO NOT use WARNING machine outdoors. DO NOT expose to rain. Store TO PREVENT electrical shock, follow all electrical and indoors in a dry area. safety codes, including the National Electrical Code DO NOT connect the machine to the power source (NEC) and the Occupational Safety and Health before you have completed the set up process. - Page 13 EXTENSION CORDS Fig. 1-1 WARNING To reduce the risk of fire or electrical shock, use the proper gauge of extension cord. When using an extension cord, be sure to use one heavy enough to carry the current your machine will draw. The smaller the gauge-number, the larger the diameter of the extension cord is.
-
Page 14: Unpacking & Inventory
For missing Remove all of the parts from the shipping box and lay parts, contact Steel City at 1-877-SC4-TOOL. them on a clean work surface. Compare the items to figure 1-2, verify that all items are accounted for before CAUTION: Make certain shipping blocks have been discarding the shipping box. -
Page 15: Assembly
ASSEMBLY Fig. 2-1 WARNING 1. DO NOT assemble the Air Cleaner until you are sure the tool IS NOT plugged in. 2. DO NOT assemble the Air Cleaner until you are sure the power switch is in the “OFF” position. 3. -
Page 16: Operations
OPERATIONS CAUTION: Make certain shipping blocks have been WARNING removed from between cabinet and blower assembly, before unit is turned on. DO NOT operate this unit without the filters in place. FUNCTION NOTE: The Air Cleaner may produce a slight odor for the first couple hours of operation due to the protective This Air Cleaner is furnished with two filters: an outer coating which is applied to internal components. -
Page 17: Maintenance
Air Cleaner. WARNING Repairs to the Air Cleaner should be performed by trained personnel only. Contact your nearest Steel City Authorized Service Center for authorized service. Unauthorized repairs or replacement with non-factory 3. Remove the three-pocket inner filter (B) in the parts could cause serious injury to the operator and same manner as the electrostatic filter. -
Page 18: Troubleshooting
TROUBLESHOOTING GUIDE TO PREVENT INJURY TO YOURSELF or damage to the Air Cleaner, turn the switch to the “OFF” position and unplug the power cord from the electrical receptacle before making any adjustments. PROBLEM LIKELY CAUSE(S) SOLUTION Motor does not 1. - Page 19 N NOTES N...
- Page 20 PARTS...
-
Page 21: Parts List
SPEC LABEL OR91328 FLANGE NUT 1/4-20 OR70251 USER MANUAL, 65100 (NOT SHOWN) OR91329 BLOWER ASSEMBLY OR70686 USER MANUAL, 65100 FRENCH (NOT SHOWN) OR90601 WARNING LABEL OR70687 USER MANUAL, 65100 SPANISH (NOT SHOWN) OR91330 HEX HEAD SCREW 1/4-20 x 1” OR70254... - Page 22 N NOTES N...
- Page 23 STEEL CITY TOOL WORKS www.steelcitytoolworks.com 5 Year Warranty...
Need help?
Do you have a question about the 65100 and is the answer not in the manual?
Questions and answers