Scanning For The Dell Wireless Dock D5000 - Dell D5000 User Manual

Note: If you select No, you may need to install all the three drivers manually
from the location c:/program files/Wilocity/Dock_Drivers. Run *.exe from the
respective folders to install the drivers.
Once the Wireless Docking software is installed, an icon is created in the
taskbar notification area and the software runs automatically. You can also
access the Wireless Docking software through a desktop icon on your
PC/laptop.
4.1.1 Uninstalling the Software
You can uninstall the Wireless Docking software using the Windows Control
Panel and by selecting Uninstall or change a program window option.

4.2 Scanning for the Dell Wireless Dock D5000

The Wireless Docking software runs automatically and scans for available
docks when your PC/laptop boots. An icon is displayed in the taskbar
notification area. For easy identification, the color of the icon changes when a
dock is connected.
Note: If the taskbar notification icon is hidden, expand the taskbar by selecting
You can also see the SSID and signal strength of the connected dock when
you move the mouse over the icon. The following table describes the color
status of the Wireless Docking software's taskbar notification icon:
Icon Color
Green
Blue
Red
Orange
Grey
Note: If the Wireless Docking software taskbar identification icon does not
change from red color to blue color or green color, first restart your PC/laptop.
If this still does not resolve the issue, you need to re-install the Wireless
Docking software again.
Description
Connected to a dock
Disconnected from the dock
Error of any kind
Airplane Mode is ON or Hardware switch is
OFF on your PC/laptop
Your PC/laptop does not support wireless
docking using 60 GHz frequency
11