Advertisement
registering the wireless
gateway
Make sure you register your product with HP
after the installation process is complete. The
registration option has been pre-selected for you.
HP registration provides you with automatic
notification of updates to the firmware installed
on the Gateway and to the software installed on
the PC.
If you choose to register your product at a later
date, enter the following into the address
window of your Web browser (such as Internet
Explorer or Netscape):
http://register.hp.com
Then press Enter.
6
Filename: QS Wireless GW.doc
Title: HP-Print2k.dot
Template: HP Quick Start.dot
Author: Rob Heiret
Revision #: 31
Page: 6 of 12
Printed: 08/14/01 04:23 PM
converting from an Ethernet
to a wireless connection
If, after installing the Wireless Gateway and the
first computer, you wish to change the first
computer to a wireless connection (instead of
Ethernet), follow these steps:
1 Disconnect the Ethernet cable between the
first computer and the Wireless Gateway.
2 Complete the steps for "installing additional
network computers" described in the
following section.
Last Saved By: Elizabeth Stoneburg
Advertisement
