Advertisement
2 Plug the Type A rectangular end into the USB
port on your computer. Consult the user
documentation of your computer if you are
unsure where the USB port is located.
3 Plug one end of the Ethernet cable into the
Ethernet port on your adapter as shown in
the diagram:
Ethernet cable
4 Plug the other end of the Ethernet cable into
the Ethernet port of your Gateway, hub, or
switch.
Filename: QS Ethernet USB Adapter.doc
Template: HP Quick Start.dot
Author: Rob Heiret
Revision #: 11
Page: 3 of 7
Printed: 08/15/01 05:17 PM
installing the driver
1 Turn on the computer and insert the CD-ROM
into the CD-ROM drive of the computer.
to Ethernet port
of Gateway or
5-port switch
Title: HP-Print2k.dot
Last Saved By: Elizabeth Stoneburg
Ethernet USB network adapter
3
Advertisement
