Advertisement
before you begin
1 Verify that all of the box contents are
included.
2 Confirm that the computers you plan to
connect to the Adapter are all running either
Windows 98, 98SE, Me, 2000, or XP.
Windows 2000 and XP Professional require
administrative privileges to install this
software — see your user documentation for
details.
3 Verify that each computer you're connecting
to the network has a CD-ROM drive to run
the installation software.
4 If the computer is on, turn it off.
2
Filename: QS Ethernet USB Adapter.doc
Template: HP Quick Start.dot
Author: Rob Heiret
Revision #: 11
Page: 2 of 7
Printed: 08/15/01 05:17 PM
connecting the network
adapter
1 Plug the Type B square plug of the USB
cable into the USB port of the adapter as
illustrated.
USB cable
Title: HP-Print2k.dot
Last Saved By: Elizabeth Stoneburg
Type B
square plug
to USB
port on PC
Type A
rectangular plug
Advertisement
