HP Ethernet Gateway hn200e Quick Start Manual page 6

5 Select installation. The installation wizard
screen appears.
4
Filename: QS Ether GW.doc Title: HP-Print2k.dot
Template: HP Quick Start.dot Author: Rob Heiret
Revision #: 49 Page: 4 of 11 Printed: 08/14/01 03:29 PM
6 Follow the onscreen instructions to set up and
configure the Ethernet Gateway, and to
connect the cables. Select First PC when
you are prompted to set up either a first PC
or an additional PC.
7 You will be asked to make cable connections
with all equipment powered on. This is
necessary to interactively detect that each
connection has been properly made. There is
no danger to you or to your equipment.
Last Saved By: Elizabeth Stoneburg