Table of Contents
Advertisement
Using the Document Feeder
1
Slide the Document Guide Plate to the size of
the originals.
When using large size originals, flip up the
Extenders.
2
Load a neat stack of originals face up on the
Document Feed Tray.
Make sure that the top level of the original stack
does not exceed the
3
From the 10-Key Pad, set the desired number
of copies to be made.
If you want to use the auxiliary functions, touch
Orig.
Copy
Key and set the appropriate functions.
<Using the Single Automatic Document
Feeding Mode (SADF Mode)>
Open the Single Document Feed Tray, slide
the Guide Plate to the size of the original and
insert the original face down into the Tray.
The original is automatically taken up and the
copy cycle is started.
marking.
,
, or the
Density
Auxiliary
3
Extender
1166O022AA
1166O024AC
1166O030AA
1166O026AB
Advertisement
Table of Contents
