Security - Ovislink HP-1000E v2 User Manual

MAC Address
Data Rate (Mbps)
Scan Powerline
Network

Security

The Security screen allows you to set the Network Password of the Powerline device being used by
your PC. All of the Powerline devices on your Powerline network must use the same Network
Password.
Note: Remember this password. You will need to set this password on
each powerline device on your powerline network.
Network Password
Set Local
Restore Default
The MAC address of each Powerline device is shown
here.
The transmission speed of the Powerline device is
displayed here.
Click the Scan Powerline Network button to perform a
search for all Powerline devices configured with the
same Network Password.
By default the Network password is "HomePlug"
password must have between 4 and 24 characters. The Network
Password is case-sensitive, so note whether you use lowercase
or uppercase letters. It can include any letters of the alphabet,
numbers, or punctuation marks
Enter the Network Password in the Network Password field. Then
click the Set Local button.
Click the Restore Default button to set the Network Password
back to its factory default setting, HomePlug. Then click the Set
button.
- 7 - HP1000E v2 User's Manual
and the