Siemens WK14D540GB Installation And Operating Instructions Manual page 26

Removing the transport
safety bolts
Positioning and
levelling
Positioning
Unscrew all four screws
using the spanner
supplied
Insert the protective
covers.
– Appliance stability is essential to ensure that the washer-dryer does not
"creep" during spin cycles.
– The installation area must be firm, clean and level.
– Parquet floors and soft floor coverings, e.g. carpets or foam-backed
floor coverings, are unsuitable.
Slide sheets make it easier to slide the washing machine into the
installation recess.
– Can be ordered from the after-sales service, spare part no. 66 1827.
– Moisten the slide sheets with a mixture of water and washing-up liquid
before sliding the machine into place. Do not use grease and/or oil.
Remove all 4 transport safety bolts
completely and take the mains cable out of
the retainers.
– Before using the appliance for the first
time, you must make sure that all
4 transport safety bolts have been
removed and kept safe for any
subsequent transport.
– If you need to transport the appliance at a
later date, always re-affix the transport
safety bolts to prevent damage to the
machine.
26